Auto Sealing Beverage Equipment carbonated soft Drink Bottling
Production Line Beer Can Filling Canning Machine
1. Model GF12-1
2.Capacity : 1500BPH (500ml)
3. Suitable : Plastic bottle 250ml-2000ml
4. Machine size : 1750x1250x2200mm
5.Machine electric brand : SIEMENS , MITSUBISHI, Schneider
6.Machine power : 1.5KW
7. Machine weight : 2200kg
8. Machine include function : Filling Capping
9. Application: Beverage, water , cola , beer , juice , oil
Beer can filling-sealing 2-1 machine is a filling sealing 2 in 1
machine designed combined with the actual situation in our country
after the introduction and absorption.
It is used to clean empty can in canning production line. Empty
cans will be sent to turning device first, which will be turned
around then transferred into rinsing machine. Empty can will be
running from top to bottom along the turning device. When empty
cans enter into rinser, they will be cleaned by 80℃ hot water
(provided by customer) to reach aseptic state of can. There is
certain inclination angle in both sides of rinser, whose size could
be adjusted properly when needed. Empty cans will be rolling in
parallel way from top to end; the waste water will be discharged
from outfall
It is suitable for filling and capping carbonated beverage such as
beer, CSD, etc. It is equipped the advanced device, electrical
equipment, and pneumatic control technology. It has the
characteristics of filling reposefully, high speed, liquid level
control, capping reliably, frequency conversion timing, less
material loss. It can be equipped long-distance control system. It
is the preferred equipment for the medium beer and beverage plant.
| Model | GF12-1 | GF18-4 | GF24-6 |
| Capacity | 1200-1500cans/hour | 5000-6000 CPH | 7000-9000 CPH |
| Can volume | 200ml-1000ml | 200ml-1000ml | 200ml-1000ml |
| Can diameater | 50-70mm | 50-70mm | 50-70mm |
| Bottle high | 120-170mm | 120-170mm | 120-170mm |
| Machine power | 1.5KW | 2.2KW | 3.7KW |
| Machine size | 175x120x195CM | 305x175x220CM | 340X195X220CM |
| S/N | Name | Brand | Country |
| 1 | Main motor | ABB | Switzerland |
| 2 | Inverter | MITSUBISHI | Japan |
| 3 | PLC | OMRON | Japan |
| 4 | Touch screen | MITSUBISHI | Japan |
| 5 | Contactor | SCHNEIDER | France |
| 6 | Thermo- relay | SCHNEIDER | France |
| 7 | Air-break switch | SCHNEIDER | France |
| 8 | Proximity switch | TURCK | USA |
| 9 | Photoelectric switch | BANNER | USA |
| 10 | Air circuit system | SMC | Japan |
| 11 | Water pump | Southern | Japan |
Zhangjiagang City Bievo Machinery Co., Ltd. is located in a
national level development zone - Zhangjiagang Economic And
Technology Development Zone, covering area more than 8,000 square
meters.We enjoy convenient transportation with Shanghai Hongqiao
International Airport and Shanghai Pudong International Airport on
hand.Which accumulated a great number of China's top technologists
in the liquid beverage industry.We have complete system from
designing, manufacturing, installation, training to after
service.Our main product water production line, carbonated beverage
production line . Fruit juice and milk production line ,3 to 5
gallons production line, daily chemical production line and so
on.Plat and tube UHT device, CIP system.All the products are sold
well.We devote ourselves to the development, research and
production of liquid food and beverage filling and packing industry
.
Q1: Where is your factory? How can I visit there?
A1: Our location is No.66, Baixiong Road, Sanxing Town,
Zhangjiagang City, Jiangsu Province, China
Our factory is nearby from Shanghai City, if you fly from abroad,
we can pick you up at the airport.
Q2: What's your payment stipulation?
A2: Our standard payment is 30% of the total amount for deposit,
pay the balance before the shippment. For the others,
we can further discuss.
Q3: Do you have technicians for installation?
A3: We are responsible for the installaion in your country, you can
also arange your staffs to our factory to learn how to operate the
complete line.
Q4: How about the spare parts?
A4: We will send one year enough easy broken spare parts together
with the machines when shipping, In the course of the warranty
time, we can delivery you including the cost and fees.
Installation and commissioning
After the equipments arrived buyer's workshop, the buyer should
take it's place for each equipment according to the supplied
layout; the seller will send the experienced technician to guide
the installation and debugging and trail production, and fulfil the
designed capability within the designed time. The installation,
debugging and training is about 30-35 days
Training
The seller will supply technical training to the buyer. The
training is includes: equipment structure and maintenance, control
and operation. After training, the technicians of the buyer will
grasp relevant operation and maintenance skills, and could adjust
the technologies more skilled, and can deal with all kinds of
malfunction in time.
After-sales service
1) After qualified of the equipment, the seller will supply one
year guarantee, control system one year guarantee, free charge for
wearing parts, and other spare parts with cost price. Within
guarantee period, the technicians who accepted training should
strictly obey the requirements asked by the seller to operate the
equipments and maintenance, to find the common malfunctions and
fault clearing in time; if the technicians of the buyer couldn't
solve the problems themselves, the after-sales department will
supply long range guide service by phone; if relevant measurements
couldn't solve the problems, the seller will send the technicians
to the buyer factory, clear the fault or relevant technical
problems on site, the charges will reference to the installation
and debugging charges.
2) After guaranteed, the seller will supply widely favorable
technical support, after-sales service for the lifetime: favorable
price for the wearing parts and other spare parts.
